|
Hull & Deck Construction
|
- SCRIMP infusion molded sandwich construction
- Uni-and multi-directional fibreglass fabrics
- Low density light weight balsa core
- Vinylester infusion resin
- 10 year anti-osmosis warranty and a 5 year structural warranty
- Bonded overlapped hull-to-deck joint
- Infused structural grid and mast step
- SCRIMP infusion molded, main bulkhead.
|
|
Keel & Rudder
|
- Low VCG keel with encapsulated cast iron fin & lead bulb
- Keel is bolted & bonded to shallow sump
- High aspect ratio composite rudder
- Uni and multi-directional fibreglass fabrics
- Stainless steel rudder stock
- Self-aligning performance rudder bearings
|
|
Spars & Rigging
|
- Carbon fiber mast with double swept spreader configuration
- Aluminium racing boom
- Pre-molded mast wedge system
- Adjustable mast step
- Discontinuous rod standing rigging
- Hydraulic backstay adjuster with panel on steering pedestal
- Jib furling system with below deck furler drum
- Carbon fiber retracting bow sprit
- Solid boom vang with purchase
- Complete running rigging package
|
|
Deck Hardware
|
- Harken winches & deck hardware
- Belowdeck 2:1 mainsheet system
- Floor mounted mainsheet traveller
- Adjustable jib tracks including 8:1 adjustable purchase
- Custom stainless steel shroud and backstay chainplates
- Bow and stern mooring cleats
- Bow anchor locker
- Overhead ventilation hatches for head, forward cabin, head & main salon
- Opening portlights for head, forward cabin, head, main salon & aft cabins
- Exhaust vent openings in main cabin overhead below seahood
- Bow & stern rails & stanchions supported double lifelines
- Cabin top handrails
- Aluminum racing wheel with leather cover
- Compass on wheel pedestal with stainless binnacle guard
- Acrylic companionway washboard with lock, stored in aft cockpit locker
- Emergency tiller
|
|
Auxiliary Power
|
- Volvo D2 40 HP Saildrive diesel engine & 115 AH alternator
- Volvo engine controls & fuel guage recessed in cockpit with acrylic protection
- 35 gallon aluminum fuel tank
- Sound insulated engine compartment, ventilation pipes
- Two-blade folding propeller
|
| Systems |
- Manual & Electric bilge pumps
- Pressurized fresh water system with Hot water tank (5 gallon)
- Fresh water tank (42 gallon)
- DC refrigeration
- Marine toilet with holding tank system and pump out
- Two 80 AH AGM type batteries & one 70 AH battery for engine
- 12V Electrical distribution panel
- 110V distribution panel, main circuit breaker and inlet
- Halogen head & cabin lighting package
- Low voltage LED navigation lights, mast steaming and mooring lights
- Grounding system for protection against lightning
- Battery charger
|
| Interior |
- Choice of layout options: 3 cabin or 2 cabin (see illustration above)
- Cold-molded, solid, and laminated mahogany wood, finished in satin varnish
- White wood effect on hull in main cabin, vinyl lining on hull in sleeping cabins
- Cored and insulated doors to all cabin areas
- Molded & enclosed head area forward with shower, storage, large sink
- Forward cabin V-berth with locker & shelf storage with great ventilation
- Main salon area with settee berths, table, lockers, safety handrails
- Large galley with double sink, LPG stove/oven, and plenty of outboard storage
- Nav station with chart and gear storage, drawers & panel for electronics
- Aft cabins with large double berths, storage lockers and shelves, and portlights
- Offshore protected companionway with handrails and angled ladder treads
|
Join Our Email List!
